Coogee

This project was to be a new kitchen and dining add on to the entrance ground floor level of about 2.7m x 7m. After closer inspection the external walls of the home were founded on a good 5 m of sand whick overlaid a sloping rock bed.

Water had been running under ground over the years causing walls to sink and crack. A number of bodgee repairs had been carried out over the many incarnations of this of this building which had been part of the original Banker Gordons estate in the days when it was quicker to take a boat from the back door to Sydney cove as opposed to riding a horse direct.To be sure there was going to be no further subsidence of existing walls it was necessary to underpin these.

As such it was decided that a screw pier underpinning slab was the best solution to handle this problem at the same time adding further function to the place as this space could now be used as an external shower area.

Getting into it !

You can see what a screw pier looks like here.

Getting slab ready to pour

Pump getting set up for pour.

Slab poured.

Bricking up to support the wall.

Steel frame being erected.

grass over.

Kitchen walls ready to be knocked out.

Wall framing happening

Roof framing

Extra Steel beam going in to support existing over flexed beams. Existing beam ends cut off and replaced with supporting plates as these were totally corroded in the brickwork.

Internal beams fixed in place before the rest of brick wall is demolished for safety.

Three layers of construction here...ceiling , old roof, newer deck which had leaked unchecked except for the doggist in ceiling guttering and leak trays.

Leak trays with hoses...boy that deck must have been a leak night mare to go to the effort to build an in ceiling leak catch system.

Copper guttering rotted away..the sea side is a harsh environment...forget colorbond...stainless the only way to go.